Zippy Technology DM1W4-6D50F,DC N + 1 Redundant Form,1350W, Input Type DC -48V, (DxWxH) 340/13.39 (mm/inch) x 422/16.61 (mm/inch) x 43/1.69 (mm/inch), Module DM1W-6500F

Quick Specs

Casing (Enclosure)	Fully Enclosed
Form Factor	N1 Redundant
Input Type	DC
Manufacturer	ZIPPY TECHNOLOGY
Number of Outputs	4
Output Power Max	1350 W
Output Type	DC

view all specs

Product Features

• As Logic Level Is High, Outputs Voltage Were Disable
• Safety: Meet Ul 60950, Csa 60950, Tuv En-60950
• Dielectric Withstanding: Input/Output 1500 Vac For 1 Minute
• Remote On / Off Control
• Hold Up Time: 1.6 Ms Minimum At Full Load & -48vdc Input Voltage
• Will Disable/Enable All The Output Voltage (Exclude +5v Stand By)
• Emi: Meet Fcc Class A, Cispr 22 Class A
• Over Voltage Protection:+5v - 5.7v ~ 6.5v, +3.3v - 3.9v ~ 4.7v, +12v - 13.3v ~ 14.3v
• Over Load Protection: 110 ~ 160% Max
• Temperature Range: Operating 0C --- 40C, Storage –20C --- 70C
• Cooling: Two 38 X 38 X 28mm Dc Fans
• Dc Inlet In Each Module
• Power Good Signal: On Delay 100 Ms To 500 Ms, Off Delay 1 Ms
• As Logic Level Is Low, Outputs Voltage Were Enable
• Efficiency: 68% Typical, At Full Load
• Input To Fram Ground 1500 Vac For 1 Minute
• Over Current Protection: +5v, +12v, +3.3v
• The Power Supply Shall Accept A Logic Open Collector Level Which