Zippy Technology DM1S2-5401V4H, DC 1U Redundant Form,400W, Input Type DC -48V, (DxWxH) 355/13.98 (mm/inch) x 106/4.17 (mm/inch) x 41.3/1.63 (mm/inch), Module DM1S-3551V, High Effenciency Series

Quick Specs

Casing (Enclosure)	Fully Enclosed
Form Factor	1U
Form Factor	1U Redundant
Form Factor	Micro Redundant
Input Type	DC
Manufacturer	ZIPPY TECHNOLOGY
Number of Outputs	1
Output Power Max	400 W
Output Type	DC

view all specs

Product Features

• Over voltage protection: +5v-5.9~6.7v, +3.3v-3.9~4.3v, +12v-13~15.6v
• Over current protection: +3.3v-27.5~37.5a, +5v-27.5~37.5a, +12v-36.3~59.4a
• Short circuit protection: +5v, +3.3v, +12v, -12v; auto-recovered: +5vsb
• Dielectric withstand: input/output 1800 vac for 1 second input to frame ground 1800 vac for 1 second
• The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v stand by).
• Efficiency: >80% at -48v, full load
• Emi noise filter: cispr22 class a
• Remote on/off control
• Over power protection: 110-170% max
• Humidity: operating humidity: 20%~80%; non-operating humidity: 10%~90%
• Hold up time: when power shutdown dc output 12v must be maintain 1.6ms in regulation limit at normal input voltage
• Safety: to meet ul, tuv, cb
• Power good signal: on delay 100ms to 500ms
• Temperature range: operating 0C-40C, storage -20C-80C; operating temperature from 0C should start from dc -48v
• As logic level is low, outputs voltage were enable, as logic level is high, outputs voltage were disable.