Zippy Technology DM1L2-5600V3V,DC 2U Redundant Form,600W, Input Type DC -48V, (DxWxH) 330/12.99 (mm/inch) x 101.2/3.98 (mm/inch) x 84/3.31 (mm/inch), Module DM1L-5600V, High Effenciency Series

Quick Specs

Casing (Enclosure)	Fully Enclosed
Form Factor	2U
Form Factor	2U Redundant
Input Type	DC
Manufacturer	ZIPPY TECHNOLOGY
Number of Outputs	2
Output Power Max	600 W
Output Type	DC

view all specs

Product Features

• The unit shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v stand by).
• Short current protection:+5v,+12v,+3.3v
• Safety: to meet ul, cul, tuv
• Dielectric withstand: input/output 1500 vac for 1 minute input to frame ground 1500 vac for 1 minute
• Emi: fcc class a, cispr 22 class a
• Hold up time: 1ms min. At full load
• Power good signal: on delay 100ms to 500ms, off delay 1ms
• Dc inlet in each module
• As logic level is low, outputs voltage were enable, as logic level is high, outputs voltage were disable.
• Cooling: two 38x38x28mm dc fans
• Efficiency: 80% typical, at input -48v full load
• Over power protection: 110~150% max
• Temperature range: operating 0C~50C, storage -20C~80C
• Remote on / off control
• Over voltage protection: +5v-5.7v~6.5v, +3.3v-3.9v~4.3v, +12v-13.3v~14.3v