Find out more about our Partner Program Can't find a part? Bet we can! Contact us: 1-800-941-0322

Zippy Technology MRM-6550P,Mini Redundant Form,550W, Input Type Power Factor Correction (PFC), (DxWxH) 254/10 (mm/inch) x 150/5.91 (mm/inch) x 84/3.31 (mm/inch), Module MRM-6550P-R

Quick Specs

Casing (Enclosure) Fully Enclosed
Form Factor Mini Redundant
Input Type AC
Manufacturer ZIPPY TECHNOLOGY
Number of Outputs 2
Output Power Max 550 W
Output Type DC
view all specs

Product Features

  • Safety: meet ul 60950, csa 22.2 no/ 60950, tüv iec 60950
  • Humidity: operating: 20%-80%, non-operating: 10%-90%
  • Input to frame ground 1500 vac for 1 minute
  • Emi noise filter: fcc class b, cispr22 class b
  • Over current protection: 5v, 12v, 3.3v 130% +/- 20% at full load -5v, -12v short circuit.
  • Hot-swappable / hot-pluggable redundancy function
  • Remote sensing design
  • Over voltage protection: +5v -> 5.7v ~ 6.5v, 3.3v -> 3.9v ~ 4.5v, 12v -> 13.3v~ 14.5v
  • Faulty alarm methods: led, buzzer, ttl signal
  • Efficiency: 68% typical, at full load
  • Storage: -20C --- 80C
  • Balance load sharing design
  • Remarks:85% is normal condition and 95% is with special coating process
  • Hold up time: 16 ms minimum at full load & 90 vac input voltage
  • Dielectric withstand: input / output 1500 vac for 1 minute
  • Remote on / off control
  • Isolation: built-in in the power module
  • Over load protection: 110 ~ 150% max.
  • Meet iec-1000-3-2 class d ( active pfc )
  • Temperature range: operating: 0C –50C
  • Power good signal: on delay 100 ms to 500 ms, off delay 1 ms

Full Product Specifications

Casing (Enclosure) Fully Enclosed
Form Factor Mini Redundant
Input Type AC
Manufacturer ZIPPY TECHNOLOGY
Number of Outputs 2
Output Power Max 550 W
Output Type DC